Allnet-Italy | Products | Surveillance, Access Management, IoT | Sensors

Articoli 445
Products per page
ALTA wireless pressure meters measure pressure from a 5 volt pressure transducer and transmits the pressure measurement to iMonnit. By connecting the Monnit wireless pressure sensor to a pressurized gas, liquid or vapor supply line, it can measure the pressure within the line and send data to the iMonnit Online Sensor Monitoring and Notification System. The data is stored in the online system and can be reviewed and exported as a data sheet or graph. User customization allows you to set notifications and alerts from the system so you can know immediately if pressure is above or below an optimal range. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-PS-050 industrial environmental sensor/monitor…

ALTA wireless pressure meters measure pressure from a 5 volt pressure transducer and transmits the…
Brand: Monnit
Code: ART-109685
MPN
MNS2-8-W2-PS-050
EAN -
The Wireless Thermocouple Sensor is available with a hardwired thermocouple or K-type connector to support various thermocouple types and ranges. The hardwired thermocouple option measures temperatures up to 400°C (752°F). The K-type connector with Probe includes a needle probe that measures temperatures up to 400°C (752°F). The sensor is programmed to sleep for a user-given time interval (heartbeat) and then wakeup, send power to the thermocouple and wait for it to stabilize, and convert the analog data, mathematically compute the temperature and transmit the data to the gateway. To stay within the abilities of the processor, the temperature is computed off a data table provided by the manufacturer. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-TS-TC-KP temperature/humidity sensor Indoor/Outdoor…

The Wireless Thermocouple Sensor is available with a hardwired thermocouple or K-type connector to…
Brand: Monnit
Code: ART-109680
MPN
MNS2-8-W2-TS-TC-KP
EAN -
Monnit wireless water temperature sensor use a 3 foot external water sealed sensor probe to measure temperatures in water or non-combustible liquids. Perfect for monitoring temperatures in water storage tanks, pools, aquariums and natural wet-life environments. User customization allows you to set the frequency of readings and the ability to set conditions for text and/or email notifications from the system. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.

Monnit MNS2-8-W1-TS-WT-L03 temperature/humidity sensor Outdoor…

Monnit wireless water temperature sensor use a 3 foot external water sealed sensor probe to measure…
Brand: Monnit
Code: ART-109612
MPN
MNS2-8-W1-TS-WT-L03
EAN -
The Wireless Thermocouple Sensor is available with a hardwired thermocouple or K-type connector to support various thermocouple types and ranges. The hardwired thermocouple option measures temperatures up to 400°C (752°F). The K-type connector with Probe includes a needle probe that measures temperatures up to 400°C (752°F). The sensor is programmed to sleep for a user-given time interval (heartbeat) and then wakeup, send power to the thermocouple and wait for it to stabilize, and convert the analog data, mathematically compute the temperature and transmit the data to the gateway. To stay within the abilities of the processor, the temperature is computed off a data table provided by the manufacturer. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-TS-TC-HW temperature/humidity sensor Indoor/Outdoor…

The Wireless Thermocouple Sensor is available with a hardwired thermocouple or K-type connector to…
Brand: Monnit
Code: ART-109677
MPN
MNS2-8-W2-TS-TC-HW
EAN -

Jacarta PowerZook – taratore - Promo fino ad esaurimento scorte

Necessario per l'utilizzo di PowerZook poiché ne effettua la calibrazione. Sufficiente un taratore…
Brand: Jacarta
Code: ART-116268
MPN
POWERZOOK-taratore
EAN -
Il sensore di potenza Power Over Ethernet per ar-madi rack e data center Powerzook puo’ essere installato senza scollegare nessuna ap-parecchiatura ed e’ in grado di leggere il consumo elettrico all’ interno di un rack e di inviarne l’ informazione tramite snmp. Powerzook si installa in maniera semplicissima; per monitorare i consumi del cavo di alimentazione elettrica, fino a 32 ampere, basta posizionarlo attorno al cavo. Powerzook e’ l’ alternativa innovativa alle PDU. Per installarlo non serve scollegare apparati già installati, in questo modo si eliminano i costi e i disagi dovuti ad ogni interruzione di servizio. Powerzook puo’ giocare un ruolo estremamente importante nell’ aumentare l’ efficienza del data center e nella riduzione dei suoi costi energetici permettendo di monitorare ogni singolo rack dell’ infrastruttura. Powerzook puo’ essere installato laddove , visti gli alti costi della maggior parte delle altre soluzioni sul mercato, si e’ rinunciato alla professionalità di un monitaraggio energetico professionale. • Peso (g): 90 • Dimensioni (mm): 44L x 65H x 55P • LED: 3 x LED (alimentazione, stato, rete) • Alimentazione: PoE • Power Information: Amps • Cavo: / per il monitoraggio di PowerZook  Cavo: Cavo non schermato/armato: AWG12, AWG14, 3G4 e 3G2.5  Rating tipici del cavo: 120v/20A, 208v/20A, 230v/16A, 120v/30A, 208v/30A, 230v/32A  Diametro Massimo del cavo: 13.6mm*  Corrente: 0-32A  Frequenza: 50 o 60 Hz • Protocolli: HTML, UDP, TCP/IP, SNMP v1 • Firmware Upgrade: Si • Garanzia: 1-Year PER INIZIARE AD UTILIZZARE POWERZOOK OCCORRE UN CALIBRATORE (ART-116268). E' SUFFICIENTE UN CALIBRATORE PER QUALSIASI NUMERO DI POWERZOOK

Jacarta PowerZook – Rack Power Sensor with PoE for Data Centres…

Il sensore di potenza Power Over Ethernet per ar-madi rack e data center Powerzook puo’ essere…
Brand: Jacarta
Code: ART-116247
MPN
POWERZOOK
EAN -

Adeunis - Sensore LoRaWAN PULSE v4 IP68 - LoRaWAN® EU863-870 -…

Alert Monitor any leaks MONITOR Feedback concerning readings from gas, water and electricity sensors…
Brand: ADEUNIS
Code: ART-125409
MPN
ARF8230ABA
EAN -

Libelium Plug & Sense! SW LoRaWAN EU, Smart Water - Promo fino ad…

Il modello Smart Water e stato concepito per facilitare il monitoraggio remoto dei parametri più…
Brand: Libelium
Code: ART-111092
MPN
SWB-LW-EU
EAN 8434402712803

Libelium Plug & Sense! SE-PRO 4G EU/BR v2, Smart Environment Pro -…

Il modello Smart Environment PRO e stato creato come evoluzione di Smart Environment. Permette…
Brand: Libelium
Code: ART-110997
MPN
SEPB-4G-EU/BR-v2
EAN 8434402718690

Libelium Temperature, Humidity and Pressure Probe - Promo fino ad…

Questo prodotto può essere utilizzato solo in abbinamento ai dispositivi Plug&Sense! Per maggiori…
Brand: Libelium
Code: ART-110715
MPN
9370-P
EAN 8434402711899

Libelium Soil/Water temperature (Pt-1000) Probe - Promo fino ad…

Questo prodotto può essere utilizzato solo in abbinamento ai dispositivi Plug&Sense! Per maggiori…
Brand: Libelium
Code: ART-110689
MPN
9255-P
EAN 8434402712421
Viewed
case form title case form subtitle
company *
email *
name *
surname *
comment
privacy * accept conditions
* mandatory fields