Allnet-Italy | Products | Surveillance, Access Management, IoT | Sensors

Categorie

Surveillance, Access Management, IoT

Courses and Vendor Services

RFID tracking systems

Sensors

Gateway per Sensori

Kit per Sviluppo IoT

Smart City & Environment

Accessories

Various Sensors

LoRa

WiFi

Cellulare

Software & Licenze

Intercoms and Access control

Video surveillance

Smart Infrastructure & Connectivity

Physical security information management (PSIM)

Audible paging systems

Parking & Traffic

Robotics & Service Automation

Filters

close

Manufacturer

• ADEUNIS
• Allnet
• Axis
• Elsys
• Enginko
• Jacarta
• Libelium
• MikroTik
• MILESIGHT IoT
• Milesight TVCC
• Monnit
• MultiTech
• Radxa
• RAK Wireless
• Red Lion
• Shelly
• SKIPLY
• Synergy21
• TEKELEK
• TELTONIKA
• Ubiquiti
• Vigilate

Reset filters

Go to Results

Articoli 448

Products per page

12 24 36 48

Brand

Stock available End User Best Price

Monnit MNS2-8-W2-VD-AC industrial environmental sensor/monitor Voltage…

Monnit

ART-109654

MPN: MNS2-8-W2-VD-AC

EAN   113690305970

The AC Voltage Detection Sensor notifies of the presence or absence of electricity. It is intended for use on devices using supply power from 24 - 500 VAC. Not intended for voltages higher than 500 VAC and also not intended for use with DC sources. Perfect for HVAC systems, sprinkler systems, sump pumps and any other type of electrical appliance monitoring. This sensor triggers on the state change from presence to absence of voltage and vice versa. The data is displayed as either "No Voltage" or "Voltage Detected". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-VD-AC industrial environmental sensor/monitor Voltage…

The AC Voltage Detection Sensor notifies of the presence or absence of electricity. It is intended…

Brand: Monnit

Code: ART-109654

MPN

MNS2-8-W2-VD-AC

EAN 113690305970

The AC Voltage Detection Sensor notifies of the presence or absence of electricity. It is intended for use on devices using supply power from 24 - 500 VAC. Not intended for voltages higher than 500 VAC and also not intended for use with DC sources. Perfect for HVAC systems, sprinkler systems, sump pumps and any other type of electrical appliance monitoring. This sensor triggers on the state change from presence to absence of voltage and vice versa. The data is displayed as either "No Voltage" or "Voltage Detected". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Brand: Monnit

Code: ART-109654

MPN

MNS2-8-W2-VD-AC

EAN 113690305970

stock 6

Your Price

INFO

Monnit MNS2-8-W2-VM-500 industrial environmental sensor/monitor…

Monnit

ART-109648

MPN: MNS2-8-W2-VM-500

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-VM-500 industrial environmental sensor/monitor…

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended…

Brand: Monnit

Code: ART-109648

MPN

MNS2-8-W2-VM-500

EAN -

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Brand: Monnit

Code: ART-109648

MPN

MNS2-8-W2-VM-500

stock 2

Your Price

INFO

Monnit MNS2-8-W2-VM-005 industrial environmental sensor/monitor…

Monnit

ART-109639

MPN: MNS2-8-W2-VM-005

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-VM-005 industrial environmental sensor/monitor…

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended…

Brand: Monnit

Code: ART-109639

MPN

MNS2-8-W2-VM-005

EAN -

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Brand: Monnit

Code: ART-109639

MPN

MNS2-8-W2-VM-005

stock 1

Your Price

INFO

Monnit MNS2-8-W2-CM-020 industrial environmental sensor/monitor…

Monnit

ART-109659

MPN: MNS2-8-W2-CM-020

ALTA wireless AC Current Meters measure the RMS current of an alternating current (AC) system using a current transformer (CT) that wraps around the "hot" wire of a two wire (hot, common, ground(optional)) power system. The sensor reports Minimum RMS current, maximum RMS current, average RMS current, and amp hours to the iMonnit system. The iMonnit system is capable of generating watt hour or kilowatt hour readings as well. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-CM-020 industrial environmental sensor/monitor…

ALTA wireless AC Current Meters measure the RMS current of an alternating current (AC) system using…

Brand: Monnit

Code: ART-109659

MPN

MNS2-8-W2-CM-020

EAN -

ALTA wireless AC Current Meters measure the RMS current of an alternating current (AC) system using a current transformer (CT) that wraps around the "hot" wire of a two wire (hot, common, ground(optional)) power system. The sensor reports Minimum RMS current, maximum RMS current, average RMS current, and amp hours to the iMonnit system. The iMonnit system is capable of generating watt hour or kilowatt hour readings as well. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Brand: Monnit

Code: ART-109659

MPN

MNS2-8-W2-CM-020

stock 3

Your Price

INFO

Monnit MNS2-8-W2-WS-WR water detector Sensmitter Wireless

Monnit

ART-109625

MPN: MNS2-8-W2-WS-WR

The ALTA Wireless Water Rope Sensor detects conductive liquids anywhere along the length of the detection rope by using two wires covered with conducting polymer. When water or conductive liquid contacts the rope, the sensor will immediately turn on the RF radio and transmit the data to the wireless gateway and iMonnit Online Sensor Monitoring and Notification System, allowing the user to immediately receive an alert by SMS text, email or voice call. The sensor rope dries quickly allowing the sensor to reset for next use. The sensor comes with an initial 10 foot section of water detection rope and can be expanded up to 100 feet by simply clicking additional 10 foot sections of detection rope together. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-WS-WR water detector Sensmitter Wireless

The ALTA Wireless Water Rope Sensor detects conductive liquids anywhere along the length of the…

Brand: Monnit

Code: ART-109625

MPN

MNS2-8-W2-WS-WR

EAN -

The ALTA Wireless Water Rope Sensor detects conductive liquids anywhere along the length of the detection rope by using two wires covered with conducting polymer. When water or conductive liquid contacts the rope, the sensor will immediately turn on the RF radio and transmit the data to the wireless gateway and iMonnit Online Sensor Monitoring and Notification System, allowing the user to immediately receive an alert by SMS text, email or voice call. The sensor rope dries quickly allowing the sensor to reset for next use. The sensor comes with an initial 10 foot section of water detection rope and can be expanded up to 100 feet by simply clicking additional 10 foot sections of detection rope together. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Brand: Monnit

Code: ART-109625

MPN

MNS2-8-W2-WS-WR

stock 2

Your Price

INFO

Monnit MNG2-8-3C3I-SC-B1-ND gateway/controller

Monnit

ART-109594

MPN: MNG2-8-3C3I-SC-B1-ND

EAN   113690300098

The ALTA International 3G Cellular Gateway is based on a 3G (UMTS/GSM) wireless engine and comes integrated with Monnit's wireless access point network (WAN) for use with all Monnit wireless sensors. (User is responsible for setting up data plan with a compatible wireless carrier.) The ALTA International 3G Cellular Gateway also features a backup battery that allows the device to continue operating for up to 24 hours in the event of a power failure, ensuring that your sensors are able to communicate with the monitoring software.

Monnit MNG2-8-3C3I-SC-B1-ND gateway/controller

The ALTA International 3G Cellular Gateway is based on a 3G (UMTS/GSM) wireless engine and comes…

Brand: Monnit

Code: ART-109594

MPN

MNG2-8-3C3I-SC-B1-ND

EAN 113690300098

The ALTA International 3G Cellular Gateway is based on a 3G (UMTS/GSM) wireless engine and comes integrated with Monnit's wireless access point network (WAN) for use with all Monnit wireless sensors. (User is responsible for setting up data plan with a compatible wireless carrier.) The ALTA International 3G Cellular Gateway also features a backup battery that allows the device to continue operating for up to 24 hours in the event of a power failure, ensuring that your sensors are able to communicate with the monitoring software.

Brand: Monnit

Code: ART-109594

MPN

MNG2-8-3C3I-SC-B1-ND

EAN 113690300098

stock 1

Your Price

INFO

Adeunis - Sensore LoRaWAN 2 input 0-10V o 4-20mA IP67

ADEUNIS

ART-125412

MPN: ARF8190BA

ALERT Provide warning should thresholds be exceeded MONITOR Monitor changes in temperatures, the humidity rate, and pressure MEASURE Monitor the machine’s consumption and humidity rate Measure the filling level Analyze the presence of gas

Adeunis - Sensore LoRaWAN 2 input 0-10V o 4-20mA IP67

ALERT Provide warning should thresholds be exceeded MONITOR Monitor changes in temperatures, the…

Brand: ADEUNIS

Code: ART-125412

MPN

ARF8190BA

EAN -

ALERT Provide warning should thresholds be exceeded MONITOR Monitor changes in temperatures, the humidity rate, and pressure MEASURE Monitor the machine’s consumption and humidity rate Measure the filling level Analyze the presence of gas

Brand: ADEUNIS

Code: ART-125412

MPN

ARF8190BA

stock 6

Your Price

INFO

LoRaWAN® wireless actuator

Enginko

ART-125003

MPN: MCF-LW13IO

This device can transmits the status of its input and control the output through the LoRaWAN® network. Can be used for industrial process control and home automation, water treatment, agriculture irrigation and similar applications.

LoRaWAN® wireless actuator

This device can transmits the status of its input and control the output through the LoRaWAN®…

Brand: Enginko

Code: ART-125003

MPN

MCF-LW13IO

EAN -

This device can transmits the status of its input and control the output through the LoRaWAN® network. Can be used for industrial process control and home automation, water treatment, agriculture irrigation and similar applications.

Brand: Enginko

Code: ART-125003

MPN

MCF-LW13IO

stock 12

Your Price

INFO

Adeunis - Sensore LoRaWAN MODBUS IP67 - LoRaWAN EU863-870

ADEUNIS

ART-125414

MPN: ARF8240AA

Alert Send new parameters or actions to be carried out to Modbus slaves. MONITOR Receive feedback on faults and alerts from Modbus slaves. Act - Reading a slave’s registers from the network - Write to a slave’s registrers from the network

Adeunis - Sensore LoRaWAN MODBUS IP67 - LoRaWAN EU863-870

Alert Send new parameters or actions to be carried out to Modbus slaves. MONITOR Receive feedback on…

Brand: ADEUNIS

Code: ART-125414

MPN

ARF8240AA

EAN -

Alert Send new parameters or actions to be carried out to Modbus slaves. MONITOR Receive feedback on faults and alerts from Modbus slaves. Act - Reading a slave’s registers from the network - Write to a slave’s registrers from the network

Brand: ADEUNIS

Code: ART-125414

MPN

ARF8240AA

stock 5

Your Price

INFO

Libelium Soil oxigen level probe - Promo fino ad esaurimento scorte

Libelium

ART-124787

MPN: 9469-P

EAN   8434402720730

Per ulteriori informazioni e sviluppi contattare iot@allnet-italia.it

Libelium Soil oxigen level probe - Promo fino ad esaurimento scorte

Per ulteriori informazioni e sviluppi contattare iot@allnet-italia.it

Brand: Libelium

Code: ART-124787

MPN

9469-P

EAN 8434402720730

Per ulteriori informazioni e sviluppi contattare iot@allnet-italia.it

Brand: Libelium

Code: ART-124787

MPN

9469-P

EAN 8434402720730

stock 3

Your Price

INFO

Libelium Plug & Sense! SA-XTR LoRaWAN EU, Smart Agriculture Xtreme…

Libelium

ART-114167

MPN: SAXB-LW-EU

EAN   8434402721126

I modelli Smart Agriculture Xtreme è un'evoluzione della nostra linea di agricoltura con una nuova selezione di sensori professionali di fascia alta. Permette di monitorare molteplici parametri ambientali che coinvolgono una vasta gamma di applicazioni, dall'analisi delle piante all'osservazione del tempo. Esistono sensori per il monitoraggio atmosferico e del suolo e per la salute delle piante. È possibile collegare fino a 32 sensori.. Per ulteriori informazione ed eventuali sviluppi contattare: iot@allnet-italia.it

Libelium Plug & Sense! SA-XTR LoRaWAN EU, Smart Agriculture Xtreme…

I modelli Smart Agriculture Xtreme è un'evoluzione della nostra linea di agricoltura con una nuova…

Brand: Libelium

Code: ART-114167

MPN

SAXB-LW-EU

EAN 8434402721126

I modelli Smart Agriculture Xtreme è un'evoluzione della nostra linea di agricoltura con una nuova selezione di sensori professionali di fascia alta. Permette di monitorare molteplici parametri ambientali che coinvolgono una vasta gamma di applicazioni, dall'analisi delle piante all'osservazione del tempo. Esistono sensori per il monitoraggio atmosferico e del suolo e per la salute delle piante. È possibile collegare fino a 32 sensori.. Per ulteriori informazione ed eventuali sviluppi contattare: iot@allnet-italia.it

Brand: Libelium

Code: ART-114167

MPN

SAXB-LW-EU

EAN 8434402721126

stock 3

Your Price

INFO

Libelium Meshlium 4G AP Scanner EU/BR - Promo fino ad esaurimento…

Libelium

ART-111258

MPN: M4G-SCAN-EU/BR

EAN   8434402712711

I dati del sensore raccolti dai nodi del Waspmote Plug & Sense! vengono inviati al Cloud dal Meshlium, il gateway IoT router appositamente progettato per collegare le reti di sensori Waspmote a Internet tramite Ethernet e 4G / 3G / 2G interfacce. Il Meshlium puo funzionare come: un router RF (XBee) a Ethernet per i nodi Waspmote un router RF (XBee) a 4G / 3G / GPRS / GSM per i nodi Waspmote WiFi Access Point WiFi to 4G/3G/GPRS/GSM router GPS – 4G/3G/GPRS/GSM real-time tracker uno scanner per smartphone (rileva dispositivi iPhone e Android) Per ulteriori informazione ed eventuali sviluppi contattare: iot@allnet-italia.it

Libelium Meshlium 4G AP Scanner EU/BR - Promo fino ad esaurimento…

I dati del sensore raccolti dai nodi del Waspmote Plug & Sense! vengono inviati al Cloud dal…

Brand: Libelium

Code: ART-111258

MPN

M4G-SCAN-EU/BR

EAN 8434402712711

I dati del sensore raccolti dai nodi del Waspmote Plug & Sense! vengono inviati al Cloud dal Meshlium, il gateway IoT router appositamente progettato per collegare le reti di sensori Waspmote a Internet tramite Ethernet e 4G / 3G / 2G interfacce. Il Meshlium puo funzionare come: un router RF (XBee) a Ethernet per i nodi Waspmote un router RF (XBee) a 4G / 3G / GPRS / GSM per i nodi Waspmote WiFi Access Point WiFi to 4G/3G/GPRS/GSM router GPS – 4G/3G/GPRS/GSM real-time tracker uno scanner per smartphone (rileva dispositivi iPhone e Android) Per ulteriori informazione ed eventuali sviluppi contattare: iot@allnet-italia.it

Brand: Libelium

Code: ART-111258

MPN

M4G-SCAN-EU/BR

EAN 8434402712711

stock 1

Your Price

INFO

Page 33 of 38 29 30 31 32 33 34 35 36 37 38