La scheda A301 è un adattatore PCI 2U che supporta il canale T3 in chiaro (44,7 Mbps) e quello E3…
Brand:
Sangoma
Codice:
ART-10648
MPN
A301
EAN
-
La scheda A301 è un adattatore PCI 2U che supporta il canale T3 in chiaro (44,7 Mbps) e quello E3 (34.4 Mbps) su due connettori BNC. L' A301 capacità di trasferimento dati pari a 132Mbps con un carico in real-time minimo per il processore. E' uno strumento ideale per le organizzazioni più grandi o gli ISP che necessitano di ulteriori collegamenti T1 o DSL. Offre agli utenti la possibilità di sfruttare le connessioni T3/E3 ad un costo più basso rispetto alle linee T1 o E1. Caratteristica tecnica: Master Bus DMA a 32 bit Interfaccia PCI a 132 Mbytes / sec Uso minimo del processore host Higher Level Protocols: IP/IPX su Frame Relay/PPP/HDLC/X.25, X.25 su Frame Relay (Annex G), BSC su X.25 (DMT and TCOP),SNA su X.25, PPPoE, PPPoA, IP su ATM
Gli switch a 10 porte Gigabit Ethernet hanno fino a un massimo di 3 connettori Gigabit Ethernet…
Brand:
Microsens
Codice:
ART-24040
MPN
MS650869PM-48-V2
EAN
-
Gli switch a 10 porte Gigabit Ethernet hanno fino a un massimo di 3 connettori Gigabit Ethernet (slot SFP) per la fibra ottica (supporto dual-speed: 100Base-FX e 1000Base-X), permettendo la costruzione di anelli in fibra ottica. Nel caso si presenti un guasto, un meccanismo brevettato da MICROSENS facilita la riconfigurazione automatica in meno di 20ms. Inoltre gli switch industriali della linea Profi Line operano in range di temperatura tra -20..+60° garantendo affidabilità e robustezza. • Supporto della tecnologia ad anello con riconfigurazione automatica in caso di guasto inferiore a 20ms • Supporto VLAN, QoS, IGMP-Snooping, STP/RSTP etc. • Management via Web-/SNMP-/CLI o NMP-software • Switch con slot SFP a 100/1000 Mbps • Funzionalità PoE sulle porte Rj45 • Range di temperature supportate: -20..+60 °C, (versione MS650869PMX-48: -40..+75 °C)
Microsense MS657208PX. Tipo interruttore: Non gestito. Tipo di porte RJ-45: Gigabit Ethernet…
Brand:
Microsens
Codice:
ART-95266
MPN
MS657208PX
EAN
MS657208PX
Microsense MS657208PX. Tipo interruttore: Non gestito. Tipo di porte RJ-45: Gigabit Ethernet (10/100/1000), Quantità di porte RJ-45: 8. Dimensioni tavola MAC: 1000 voci. Standard di rete: IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x. Connettore di alimentazione: Jack DC-ingresso. Supporto Power over Ethernet (PoE). Montabile a parete
· Compact design, lowest costs per port · Cost optimised, repeaterless copper/fiber conversion ·…
Brand:
Microsens
Codice:
ART-09758
MPN
MS416956M
EAN
-
· Compact design, lowest costs per port · Cost optimised, repeaterless copper/fiber conversion · Simple handling/installation · Support of half- and full-duplex connections · Integrated management, stackable · Optional redundant power supply 12 Port Fast Ethernet Media Converter Single mode 1310nm SC, 15 km, 19" 1HU, RJ-45, manageable 12x RJ-45 100Base-TX, 12x SC-duplex 100Base-FX, 3x RJ-45 Management With the new generation of multiport media converter it is possible to realise the media conversion of up to 12 ports in 1 height unit (1 HU). This port density can be reached also with the standard optical connectors such as ST- and SC-duplex. Beside this high port density the actual 12 port converter has several additional features such as SNMP/web-based management, optional redundant power supply and auto-crossing integrated. The MICROSENS converter are designed for the installation into 19” racks. With this compact design it is possible to reach very high port densities in the central distribution racks. The connection to the central switch is done, depending on the version, by Telco or RJ-45 cable. The Telco cables are having an RJ-21 connector with a capacity of 12 twisted-pair connections and offer flexibility and simple installation.
· Compact design, lowest costs per port · Cost optimised, repeaterless copper/fiber conversion ·…
Brand:
Microsens
Codice:
ART-09760
MPN
MS416921M
EAN
-
· Compact design, lowest costs per port · Cost optimised, repeaterless copper/fiber conversion · Simple handling/installation · Support of half- and full-duplex connections · Integrated management, stackable · Optional redundant power supply 24 Port Fast Ethernet Media Converter, 1310 nm Multimode SC, 19"1U, TELCO, manageable 2x TELCO 100Base-TX, 24x SC-duplex 100Base-FX, RPSU Management-Stack With the new generation of multiport media converter it is possible to realise the media conversion of up to 24 ports in 1 height unit (1 HU). This port density can be reached also with the standard optical connectors such as ST- and SC-duplex. Beside this high port density the actual 24 port converter has several additional features such as SNMP/web-based management, optional redundant power supply and auto-crossing integrated. The MICROSENS converter are designed for the installation into 19” racks. With this compact design it is possible to reach very high port densities in the central distribution racks. The connection to the central switch is done, depending on the version, by Telco or RJ-45 cable. The Telco cables are having an RJ-21 connector with a capacity of 12 twisted-pair connections and offer flexibility and simple installation.
· Compact design, lowest costs per port · Cost optimised, repeaterless copper/fiber conversion ·…
Brand:
Microsens
Codice:
ART-09753
MPN
MS416936M
EAN
-
· Compact design, lowest costs per port · Cost optimised, repeaterless copper/fiber conversion · Simple handling/installation · Support of half- and full-duplex connections · Integrated management, stackable · Optional redundant power supply 12 Port Fast Ethernet Media Converter Single mode 1310 nm SC, 15km, 19"1HU, TELCO, manageable 1xTELCO 100Base-TX, 12x SC-duplex 100Base-FX, 3x RJ-45 Management With the new generation of multiport media converter it is possible to realise the media conversion of up to 12 ports in 1 height unit (1 HU). This port density can be reached also with the standard optical connectors such as ST- and SC-duplex. Beside this high port density the actual 12 port converter has several additional features such as SNMP/web-based management, optional redundant power supply and auto-crossing integrated. The MICROSENS converter are designed for the installation into 19” racks. With this compact design it is possible to reach very high port densities in the central distribution racks. The connection to the central switch is done, depending on the version, by Telco or RJ-45 cable. The Telco cables are having an RJ-21 connector with a capacity of 12 twisted-pair connections and offer flexibility and simple installation.
· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex…
Brand:
Microsens
Codice:
ART-09544
MPN
MS400160
EAN
-
· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex mode manual configurable · multimode max. 2 km, single mode versions up to 125 km, optional with simplex fiber (WDM) · ST-/SC-connectors, optional LC, VF-45 and MT-RJ Fast Ethernet Bridge 1x10/100TX 1x100FX Multimode 1300nm SC, ext. power supply 1 x RJ-45 2 x SC The new Mini Bridge of MICROSENS offers an easy and cost effective integration of 10 Mbit/s Ethernet equipment into modern fiber based Fast Ethernet networks. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbit/s speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eleminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home" (FTTH) projects. With the standard 10/100Base-TX interface, the enduser can use internet services, Video on Demand and VoIP applications.