The new CyberData V2 SIP-enabled VoIP Loudspeaker Amplifier provides an easy method for implementing…
Brand:
CyberData
Code:
ART-110581
MPN
011404
EAN
011404
The new CyberData V2 SIP-enabled VoIP Loudspeaker Amplifier provides an easy method for implementing an IP-based overhead paging system for both new and legacy installations. With up to 25 watts of driving power (802.3at), the Amplifier provides direct drive of a standard Horn speaker and supports a line-out connector for connection to an external amplifier. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the Loudspeaker Amplifier can be configured to listen to multicast address and port number combinations to form paging zones. Ringer Mode The VoIP V2 Loudspeaker Amplifier supports two SIP extensions. One extension can be assigned to a page group for auto answer paging. The second extension can be assigned to a “First-to-Answer” ring group with IP phones. An audio ring file is activated when the second SIP extension of the ceiling speaker is dialed. If any of the IP phones in the ring group is answered (or if the caller hangs up), the Loudspeaker Amplifier stops ringing. Features - SIP and Simultaneous Multicast - Dual-speed ethernet 10/100 Mbps - Web-based configuration - PoE 802.3at and 802.3af-enabled - Line-in for background music - Line-out connector - DTMF controlled relay - Direct 8 Ohm speaker drive - User-uploadable tones and messages - Digital and manual volume control - Second SIP endpoint "Night Ringer" - Autoprovisioning - Auto-call voice message from input port sense -
The Ceiling Speaker Tile Reinforcement enables the CyberData VoIP Ceiling Speaker for 24-inch wide…
Brand:
CyberData
Code:
ART-08669
MPN
010991
EAN
-
The Ceiling Speaker Tile Reinforcement enables the CyberData VoIP Ceiling Speaker for 24-inch wide ceiling tile mounting. Ordering information: When ordering one of the following: - VoIP Ceiling Speaker (PN: 010844) - VoIP V2 Ceiling Speaker (PN: 011098, 011099) - VoIP V2 Talkback Ceiling Speaker (PN: 011022) - Ceiling Speaker Tile Reinforcement (PN: 010991) Please specify all of these items by their part number. Features: - Easy tile ceiling installation - Mounting kit included - Electrogalvinized steel construction - RoHS compliant - Part number: 010991 - Two years warranty
L'amplificatore per altoparlanti Cyberdata SIP-enabled VoIP fornisce un metodo semplice per…
Brand:
CyberData
Code:
ART-07126
MPN
010860
EAN
-
L'amplificatore per altoparlanti Cyberdata SIP-enabled VoIP fornisce un metodo semplice per implementare un Paging system IP-based. L'amplificatore è adatto all'utilizzo in ambienti rumorosi come magazzini e centri commerciali. Viene fornito con una custodia anti umidità NEMA. L'interfaccia è compatibile con la maggior parte dei server IP-PBX sip-based conformi al protocollo SIP RFC 3261. E' disponibile anche la versione PoE e Wireless. >► SIP (RFC 3261) compatible >► Dual speed 10/100 Mbps >► Web-based configuration >► Web-base firmware upgradeable >► PoE 802.3af Enabled (Powered-over-Ethernet) >► Wireless 802.11g option
The beroNet BNMO-2PRI module ports can be congured in NT (Network Termination) or TE (Terminal…
Brand:
Beronet
Code:
ART-125201
MPN
BNMO-2PRI
EAN
-
The beroNet BNMO-2PRI module ports can be congured in NT (Network Termination) or TE (Terminal Equipment) modes. This model is equiped with a high-precision clock and BNSBCPLUGPRI connector for beroNet SBCs. Specifications: - 2 E1/T1 ports with high-precision clock. - CE mark. - Dimensions: 105 x 46 x 9 mm
The beroNet BNMO-2E1 module ports can be congured in NT (Network Termination) or TE (Terminal…
Brand:
Beronet
Code:
ART-125200
MPN
BNMO-2E1
EAN
BNMO-2E1
The beroNet BNMO-2E1 module ports can be congured in NT (Network Termination) or TE (Terminal Equipment) modes. Specifications: - 2 PRI E1 ports configurable in TE or NT modes. - CE mark. - Dimensions: 105 x 46 x 9 mm
The beroNet BNMO-4FXS module can be used with any beroNet gateway or card. It has 4 FXS ports to…
Brand:
Beronet
Code:
ART-125196
MPN
BNMO-4FXS
EAN
-
The beroNet BNMO-4FXS module can be used with any beroNet gateway or card. It has 4 FXS ports to connect analog phones, faxes, modems, … Specifications: - 4 FXS ports. - CE mark. - Dimensions: 105 x 46 x 9 mm.
The beroNet BNMO-4FXO module can be used with any beroNet gateway or card. It has 4 FXO ports to…
Brand:
Beronet
Code:
ART-125197
MPN
BNMO-4FXO
EAN
-
The beroNet BNMO-4FXO module can be used with any beroNet gateway or card. It has 4 FXO ports to connect analog lines. Specifications: - 4 FXO ports. - CE mark. - Dimensions: 105 x 46 x 9 mm.
In the beroNet BNMO-4BRI, each port can be configured in TE (Terminal Equipment) or NT (Network…
Brand:
Beronet
Code:
ART-125194
MPN
BNMO-4BRI
EAN
-
In the beroNet BNMO-4BRI, each port can be configured in TE (Terminal Equipment) or NT (Network Termination) mode, and each port can also work in point to multipoint (PMP) or point to point (PTP). Specifications: - 4 ISDN BRI (S0). - CE mark. - Dimensions: 105 x 46 x 9 mm. - Each port configurable in TE or NT mode. - TE/NT and termination per port switchable in software (jumperfree).