Surveillance, Access Management, IoT

Allnet-Italy | Products | Surveillance, Access Management, IoT

Categorie
Surveillance, Access Management, IoT
Courses and Vendor Services
RFID tracking systems
Sensors
Intercoms and Access control
Video surveillance
Smart Infrastructure & Connectivity
Physical security information management (PSIM)
Audible paging systems
Parking & Traffic
Robotics & Service Automation
Filters
close
Reset filters
Articoli 3540
Products per page
Adeunis - Sensore LoRaWAN PULSE v4 ATEX II 2 G D - monitoraggio…
ADEUNIS
ART-125410
MPN: ARF8230FA
Alert Monitor any leaks. MONITOR - Receive values of the indexes from gas meters - Monitor over-consumption
ART-125410

Adeunis - Sensore LoRaWAN PULSE v4 ATEX II 2 G D - monitoraggio…

Alert Monitor any leaks. MONITOR - Receive values of the indexes from gas meters - Monitor…
Brand: ADEUNIS
Code: ART-125410
MPN
ARF8230FA
EAN -
INFO
Mobotix MX-Bell1-Button-F4 MxBus Grey RFID reader
Mobotix
ART-47801
MPN: MX-BELL1-BUTTON-F4
EAN   4047438017183
BellRFID Module For The IP Video Door Station - with RFID Technology, One To Five Addressees BellRFID is a modular bell button module that combines a base module with any one of six available bell button sets. The bell button set can be exchanged at any time. The module can also be used to open the door without a key via RFID card thanks to the built-in RFID technology. You can use the blue function button at the door station to listen to new mailbox messages, record new announcements and activate/deactivate the mailbox. Visitors can leave a message even without the function button. The remaining mailbox features are easily controlled using the remote station of the door station (i.e., MOBOTIX App). The BellRFID module is installed in the exactly same manner as the KeypadRFID module. BellRFID and KeypadRFID can only be used on one MxBus with a later software version of the camera.
ART-47801

Mobotix MX-Bell1-Button-F4 MxBus Grey RFID reader

BellRFID Module For The IP Video Door Station - with RFID Technology, One To Five Addressees…
Brand: Mobotix
Code: ART-47801
MPN
MX-BELL1-BUTTON-F4
EAN 4047438017183
INFO
Mobotix MX-M26B-6D Base unit
Mobotix
ART-113871
MPN: Mx-M26B-6N
EAN   4047438027977
The Allround family comprises compact, cost-efficient and extremely powerful all-round cameras featuring 6MP Moonlight technology and a vast choice of lenses including hemispheric models. Fully equipped with IP66-certified housing and long-term internal storage on a MicroSD card. - Camera-Body with freely configurable lens: Super Tele (8°) ... Ultra Wide (103°) - M25/M26 with pre-mounted 180° hemispheric lens (not interchangeable) - Latest MOBOTIX 6MP Moonlight Technology sensor delivers excellent image quality - Fast and simple installation on walls, poles or ceilings - Integrated DVR for HiRes video recording without affecting the network load - Sturdy, low-maintenance and weatherproof from -30 to +50 °C (-22 to +122 °F) (IP 66) - Digital, continuous panning, tilting, zooming - Microphone, speaker and intelligent movement sensors (MxActivitySensor)
ART-113871

Mobotix MX-M26B-6D Base unit

The Allround family comprises compact, cost-efficient and extremely powerful all-round cameras…
Brand: Mobotix
Code: ART-113871
MPN
Mx-M26B-6N
EAN 4047438027977
INFO
Tekelek Antenna LoRaWAN 1/4 wave supporto magnetico 2,5m - Promo fino…
TEKELEK
ART-125408
MPN: DTANTMA25
Questo prodotto può essere utilizzato solo in abbinamento ai dispositivi Tekelek. Per maggiori informazioni circa la compatibilità e sviluppi contattare: iot@allnet-italia.it
ART-125408

Tekelek Antenna LoRaWAN 1/4 wave supporto magnetico 2,5m - Promo fino…

Questo prodotto può essere utilizzato solo in abbinamento ai dispositivi Tekelek. Per maggiori…
Brand: TEKELEK
Code: ART-125408
MPN
DTANTMA25
EAN -
INFO
Elsys Sensore LoRaWAN temperatura, umidità, luce, movimento,…
Elsys
ART-125394
MPN: ERS-SOUND
ERS Sound è un sensore ambientale LoRaWAN ™ che misura l'ambiente indoor: il sensore è racchiuso in una scatola ambientale ed è progettato per essere montato a parete. All'interno dell'ERS sono presenti cinque sensori: sensore di temperatura sensore di umidità sensore di luminosità sensore di livello sonoro (picco e media) sensore di movimento (PIR). ERS sound è alimentato da due batterie al litio AA da 3,6 V (ER14505). La durata della batteria è stimata in 2 anni ma dipende dall'intervallo del campione, dall'intervallo di trasmissione, dalla velocità dei dati e dai fattori ambientali. Tutti i sensori Elsys sono dotati di NFC (Near Field Communication) per una facile configurazione con un telefono Android con l'applicazione "Impostazioni sensore", è possibile modificare la frequenza di campionamento, la velocità dati, le chiavi di crittografia, i trigger, l'attivazione e molto altro. La batteria non è inclusa. LoRa Alliance CERTIFIED Tutti i sensori Elsys sono costruiti da Semtech (LoRaWAN stack). Canali: US902-928, EU863-870, AS923, AU915-928, KR920-923. 
ART-125394

Elsys Sensore LoRaWAN temperatura, umidità, luce, movimento,…

ERS Sound è un sensore ambientale LoRaWAN ™ che misura l'ambiente indoor: il sensore è racchiuso…
Brand: Elsys
Code: ART-125394
MPN
ERS-SOUND
EAN -
INFO
Elsys Sensore LoRaWAN temperatura, umidità, presenza scrivania,…
Elsys
ART-125392
MPN: ERS-DESK
ERS Desk è un sensore LoRaWAN ™ che misura l'occupazione della scrivania, oltre che la temperatura, l'umidità e la luce. ERS Desk è progettato per essere montato sotto la scrivania e rileva quando qualcuno sta utilizzando la scrivania (in piedi / seduti). Questo viene fatto misurando la temperatura corporea e la temperatura ambiente insieme al movimento PIR. Può essere utilizzato per la gestione dinamica del posto di lavoro, la gestione delle strutture e le statistiche sul posto di lavoro. ERS Desk è alimentato da due batterie al litio AA da 3,6 V. La durata della batteria è stimata in un massimo di 5 anni, ma dipende dall'intervallo del campione, dall'intervallo di trasmissione, dalla velocità dei dati e dai fattori ambientali. Tutti i sensori Elsys sono dotati di NFC (Near Field Communication) per una facile configurazione con un telefono Android con l'applicazione "Impostazioni sensore", è possibile modificare la frequenza di campionamento, la velocità dati, le chiavi di crittografia, i trigger, l'attivazione e molto altro. Tutti i parametri possono anche essere modificati via etere dal server. La batteria non è inclusa. LoRa Alliance CERTIFIED Tutti i sensori Elsys sono costruiti da Semtech (LoRaWAN stack). Canali: US902-928, EU863-870, AS923, AU915-928, KR920-923. 
ART-125392

Elsys Sensore LoRaWAN temperatura, umidità, presenza scrivania,…

ERS Desk è un sensore LoRaWAN ™ che misura l'occupazione della scrivania, oltre che la…
Brand: Elsys
Code: ART-125392
MPN
ERS-DESK
EAN -
INFO
Rock Pi 4 zbh. eMMC to uSD board - Promo fino ad esaurimento scorte
Radxa
ART-117966
MPN: RockPi_eMMC_to_uSD_board
EAN   4038816158789
Si adatta a tutti i dispositivi che dispongono di una porta microUSB, cioè puoi equipaggiare il tuo Raspberry PI / BananaPI / Lemaker / Friendly Elec / Khadas ecc. Con un modulo / flash di memoria EMMC per tutti i dispositivi dotati di porta micro USB.
ART-117966

Rock Pi 4 zbh. eMMC to uSD board - Promo fino ad esaurimento scorte

Si adatta a tutti i dispositivi che dispongono di una porta microUSB, cioè puoi equipaggiare il tuo…
Brand: Radxa
Code: ART-117966
MPN
RockPi_eMMC_to_uSD_board
EAN 4038816158789
INFO
Monnit MNS2-8-W2-PS-050 industrial environmental sensor/monitor…
Monnit
ART-109685
MPN: MNS2-8-W2-PS-050
ALTA wireless pressure meters measure pressure from a 5 volt pressure transducer and transmits the pressure measurement to iMonnit. By connecting the Monnit wireless pressure sensor to a pressurized gas, liquid or vapor supply line, it can measure the pressure within the line and send data to the iMonnit Online Sensor Monitoring and Notification System. The data is stored in the online system and can be reviewed and exported as a data sheet or graph. User customization allows you to set notifications and alerts from the system so you can know immediately if pressure is above or below an optimal range. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.
ART-109685

Monnit MNS2-8-W2-PS-050 industrial environmental sensor/monitor…

ALTA wireless pressure meters measure pressure from a 5 volt pressure transducer and transmits the…
Brand: Monnit
Code: ART-109685
MPN
MNS2-8-W2-PS-050
EAN -
INFO
Monnit MNS2-8-W2-TS-TC-KP temperature/humidity sensor Indoor/Outdoor…
Monnit
ART-109680
MPN: MNS2-8-W2-TS-TC-KP
The Wireless Thermocouple Sensor is available with a hardwired thermocouple or K-type connector to support various thermocouple types and ranges. The hardwired thermocouple option measures temperatures up to 400°C (752°F). The K-type connector with Probe includes a needle probe that measures temperatures up to 400°C (752°F). The sensor is programmed to sleep for a user-given time interval (heartbeat) and then wakeup, send power to the thermocouple and wait for it to stabilize, and convert the analog data, mathematically compute the temperature and transmit the data to the gateway. To stay within the abilities of the processor, the temperature is computed off a data table provided by the manufacturer. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.
ART-109680

Monnit MNS2-8-W2-TS-TC-KP temperature/humidity sensor Indoor/Outdoor…

The Wireless Thermocouple Sensor is available with a hardwired thermocouple or K-type connector to…
Brand: Monnit
Code: ART-109680
MPN
MNS2-8-W2-TS-TC-KP
EAN -
INFO
Monnit MNS2-8-W1-TS-WT-L03 temperature/humidity sensor Outdoor…
Monnit
ART-109612
MPN: MNS2-8-W1-TS-WT-L03
Monnit wireless water temperature sensor use a 3 foot external water sealed sensor probe to measure temperatures in water or non-combustible liquids. Perfect for monitoring temperatures in water storage tanks, pools, aquariums and natural wet-life environments. User customization allows you to set the frequency of readings and the ability to set conditions for text and/or email notifications from the system. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.
ART-109612

Monnit MNS2-8-W1-TS-WT-L03 temperature/humidity sensor Outdoor…

Monnit wireless water temperature sensor use a 3 foot external water sealed sensor probe to measure…
Brand: Monnit
Code: ART-109612
MPN
MNS2-8-W1-TS-WT-L03
EAN -
INFO
Page 286 of 295 286 287 288 289 290 291 292 293 294 295
Viewed
case form title case form subtitle
company *
email *
name *
surname *
comment
privacy * accept conditions
* mandatory fields