Surveillance, Access Management, IoT

Articoli 3531

Monnit MNS2-8-IN-OC-ST door/window sensor Wireless Black,Grey

ALTA industrial wireless open/closed sensors provide information on the status of doors, windows, cabinets, etc. Know if a building or area is being accessed when it should not be, or if a door or window has been left open. Alerts can be setup to notify a user by SMS text, email or voice call if a door or window has been opened or left open. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. Monnit ALTA Industrial Sensors come in an IP65, NEMA 4X, CE rated, sealed, and weatherproof enclosure. They are powered by a single, replaceable, Industrial grade 3.6 V battery (included). An optional solar powered version is also available. The solar powered version includes a Lithium Iron Phosphate rechargeable battery in conjunction with a solar power cell to keep the battery charged and at optimal capacity. If there is no light present at the solar cell, the battery alone could continue to power the sensor for up to 8-10 years.

Monnit MNS2-8-IN-OC-ST door/window sensor Wireless Black,Grey

ALTA industrial wireless open/closed sensors provide information on the status of doors, windows,…

Brand: Monnit

Code: ART-109629

MPN

MNS2-8-IN-OC-ST

EAN -

Brand: Monnit

Code: ART-109629

MPN

MNS2-8-IN-OC-ST

INFO

FLIR FB-349 O series, thermal bullet IP camera, VOx 320x240 pixel, FOV…

FLIR

ART-107505

MPN: 427-1064-21-00

Le FLIR FB-O sono telecamere termiche IP di tipo bullet, pensate per la protezione perimetrale e contraddistinte dalla semplice integrazione. Utilizzano un sensore termico VOx da 320x240 pixel di qualita' industriale (sensibilita' La certifica ONVIF consente la compatibilita' ed integrabilita' nei piu' comuni e diffusi NVR e software di videosorveglianza, nonche' nella piattaforma FLIR United VMS, in modo da poter sfruttare l'analisi video di questi sistemi. Caratteristiche principali: Facile integrazione: nei piu' comuni NVR/VMS Supporto analisi video: tramite FLIR Intelligent Encoder IOI-TRK-101 e software di terze parti Immagine termica di qualita': nitezza e contrasto ottimizzati dagli algoritmi FLIR AGC e Digital Detail Enhancement DDE Scelta delle lenti: dal super wide 93 al tele 9 Garanzia FLIR: 10 anni per il sensore termico e 3 anni per la telecamera Video output: Flusso IP e analogico simultaneo per integrazione in sistemi di registrazione IP/NVR e DVR analogici Alimentazione: tramite Power over Ethernet NB: Versione con ottica da 93 3.7mm

FLIR FB-349 O series, thermal bullet IP camera, VOx 320x240 pixel, FOV…

Le FLIR FB-O sono telecamere termiche IP di tipo bullet, pensate per la protezione perimetrale e…

Brand: FLIR

Code: ART-107505

MPN

427-1064-21-00

EAN -

INFO

FLIR FB-324 O series, thermal bullet IP camera, VOx 320x240 pixel, FOV…

FLIR

ART-107506

MPN: 427-1064-31-00

FLIR FB-324 O series, thermal bullet IP camera, VOx 320x240 pixel, FOV…

Le FLIR FB-O sono telecamere termiche IP di tipo bullet, pensate per la protezione perimetrale e…

Brand: FLIR

Code: ART-107506

MPN

427-1064-31-00

EAN -

INFO

FLIR FB-393 O series, thermal bullet IP camera, VOx 320x240 pixel, FOV…

FLIR

ART-107504

MPN: 427-1064-11-00

FLIR FB-393 O series, thermal bullet IP camera, VOx 320x240 pixel, FOV…

Le FLIR FB-O sono telecamere termiche IP di tipo bullet, pensate per la protezione perimetrale e…

Brand: FLIR

Code: ART-107504

MPN

427-1064-11-00

EAN -

INFO

Monnit MNS2-8-W2-VD-AC industrial environmental sensor/monitor Voltage…

The AC Voltage Detection Sensor notifies of the presence or absence of electricity. It is intended for use on devices using supply power from 24 - 500 VAC. Not intended for voltages higher than 500 VAC and also not intended for use with DC sources. Perfect for HVAC systems, sprinkler systems, sump pumps and any other type of electrical appliance monitoring. This sensor triggers on the state change from presence to absence of voltage and vice versa. The data is displayed as either "No Voltage" or "Voltage Detected". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-VD-AC industrial environmental sensor/monitor Voltage…

The AC Voltage Detection Sensor notifies of the presence or absence of electricity. It is intended…

Brand: Monnit

Code: ART-109654

MPN

MNS2-8-W2-VD-AC

EAN 113690305970

Brand: Monnit

Code: ART-109654

MPN

MNS2-8-W2-VD-AC

EAN 113690305970

INFO

Monnit MNS2-8-W2-VM-500 industrial environmental sensor/monitor…

Monnit

ART-109648

MPN: MNS2-8-W2-VM-500

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-VM-500 industrial environmental sensor/monitor…

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended…

Brand: Monnit

Code: ART-109648

MPN

MNS2-8-W2-VM-500

EAN -

Brand: Monnit

Code: ART-109648

MPN

MNS2-8-W2-VM-500

INFO

Monnit MNS2-8-W2-VM-005 industrial environmental sensor/monitor…

Monnit

ART-109639

MPN: MNS2-8-W2-VM-005

Monnit MNS2-8-W2-VM-005 industrial environmental sensor/monitor…

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended…

Brand: Monnit

Code: ART-109639

MPN

MNS2-8-W2-VM-005

EAN -

Brand: Monnit

Code: ART-109639

MPN

MNS2-8-W2-VM-005

INFO

Impinj Antenna HUB (8 antenne per antenna HUB)

Impinj

ART-105993

MPN: IPJ-A6120-000

Impinj Antenna HUB, che consente di portare a 32 il numero di antenne utilizzabili con un unico Speedway Revolution R420: ogni Hub supporta fino a 8 antenne è utilizzabile soltanto associato a Speedway Revolution R420 con realease firmware Octane 4.10 per ogni reader che monti almeno 1 Hub è necessario 1 GPIO Adapter (art-38417)

Impinj Antenna HUB (8 antenne per antenna HUB)

Impinj Antenna HUB, che consente di portare a 32 il numero di antenne utilizzabili con un unico…

Brand: Impinj

Code: ART-105993

MPN

IPJ-A6120-000

EAN -

Brand: Impinj

Code: ART-105993

MPN

IPJ-A6120-000

INFO

Monnit MNS2-8-W2-CM-020 industrial environmental sensor/monitor…

Monnit

ART-109659

MPN: MNS2-8-W2-CM-020

ALTA wireless AC Current Meters measure the RMS current of an alternating current (AC) system using a current transformer (CT) that wraps around the "hot" wire of a two wire (hot, common, ground(optional)) power system. The sensor reports Minimum RMS current, maximum RMS current, average RMS current, and amp hours to the iMonnit system. The iMonnit system is capable of generating watt hour or kilowatt hour readings as well. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-CM-020 industrial environmental sensor/monitor…

ALTA wireless AC Current Meters measure the RMS current of an alternating current (AC) system using…

Brand: Monnit

Code: ART-109659

MPN

MNS2-8-W2-CM-020

EAN -

Brand: Monnit

Code: ART-109659

MPN

MNS2-8-W2-CM-020

INFO

Monnit MNS2-8-W2-WS-WR water detector Sensmitter Wireless

Monnit

ART-109625

MPN: MNS2-8-W2-WS-WR

The ALTA Wireless Water Rope Sensor detects conductive liquids anywhere along the length of the detection rope by using two wires covered with conducting polymer. When water or conductive liquid contacts the rope, the sensor will immediately turn on the RF radio and transmit the data to the wireless gateway and iMonnit Online Sensor Monitoring and Notification System, allowing the user to immediately receive an alert by SMS text, email or voice call. The sensor rope dries quickly allowing the sensor to reset for next use. The sensor comes with an initial 10 foot section of water detection rope and can be expanded up to 100 feet by simply clicking additional 10 foot sections of detection rope together. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-WS-WR water detector Sensmitter Wireless

The ALTA Wireless Water Rope Sensor detects conductive liquids anywhere along the length of the…

Brand: Monnit

Code: ART-109625

MPN

MNS2-8-W2-WS-WR

EAN -

Brand: Monnit

Code: ART-109625

MPN

MNS2-8-W2-WS-WR

INFO

Monnit MNG2-8-3C3I-SC-B1-ND gateway/controller

Monnit

ART-109594

MPN: MNG2-8-3C3I-SC-B1-ND

EAN 113690300098

The ALTA International 3G Cellular Gateway is based on a 3G (UMTS/GSM) wireless engine and comes integrated with Monnit's wireless access point network (WAN) for use with all Monnit wireless sensors. (User is responsible for setting up data plan with a compatible wireless carrier.) The ALTA International 3G Cellular Gateway also features a backup battery that allows the device to continue operating for up to 24 hours in the event of a power failure, ensuring that your sensors are able to communicate with the monitoring software.

Monnit MNG2-8-3C3I-SC-B1-ND gateway/controller

The ALTA International 3G Cellular Gateway is based on a 3G (UMTS/GSM) wireless engine and comes…

Brand: Monnit

Code: ART-109594

MPN

MNG2-8-3C3I-SC-B1-ND

EAN 113690300098

Brand: Monnit

Code: ART-109594

MPN

MNG2-8-3C3I-SC-B1-ND

EAN 113690300098

INFO

Teltonika RMS o RMS VPN Service - Remote Management Service - Credito…

TELTONIKA

ART-111879

MPN: RMS

Teltonika Networks Remote Management System (RMS) è una piattaforma IoT all-in-one user-friendly che fornisce un modo intelligente per mantenere il controllo dell'intera infrastruttura connessa in modo completamente remoto, sicuro e affidabile. GESTIONE Il controllo completo e il monitoraggio di tutta la flotta di router e gateway Teltonika Networks compatibili è una delle caratteristiche più importanti offerte da Remote Management System (RMS). Oltre a garantire la disponibilità e la sicurezza dei tuoi dispositivi, RMS offre molte funzioni per risparmiare tempo e spese mentre gestisci tutto da remoto - anche senza IP pubblico! CONNECT RMS CONNECT è un sistema di accesso unificato, che permette di raggiungere e controllare i dispositivi intelligenti a distanza con RMS. Se il vostro PLC, PC industriale, telecamera CCTV, sistema Point of Sale o altro dispositivo intelligente è raggiungibile da uno dei router o gateway compatibili con RMS, potete accedervi con RMS CONNECT senza IP pubblico o servizi VPN aggiuntivi! VPN Sappiamo quanto possa essere faticoso gestire reti su larga scala contenenti vari dispositivi. Abbiamo progettato RMS VPN per offrire il modo più semplice di impostare connessioni VPN a tutta la vostra infrastruttura. Ora puoi raggiungere da remoto, in modo semplice e sicuro più endpoint allo stesso tempo, senza doverti preoccupare di configurare diversi protocolli o di impostare i server. API Cosa c'è di più efficiente che avere un unico sistema software per la vostra infrastruttura di soluzioni tutte connesse? Con la RMS API puoi ottenere proprio questo! RMS API permette alla vostra piattaforma IoT di interagire direttamente con RMS e ottenere esattamente i dati e le funzionalità di cui avete bisogno. PREZZI E' possibile sbloccare diversi servizi RMS con crediti RMS acquistati da sul sito. Potete trovare una lista completa qui. Ecco come funzionano i crediti RMS nei diversi servizi della piattaforma. GESTIONE Teltonika offre una prova gratuita di 30 giorni per ogni nuovo dispositivo in modo da poter provare RMS gratuitamente per un mese! Dopo la fine del periodo di prova, costa un credito per godere del servizio RMS MANAGEMENT per 30 giorni. La licenza si estende automaticamente fino a quando hai dei crediti nel tuo account. CONNESSIONE & VPN Quando si tratta di accedere ad altri dispositivi attraverso i router e gateway, Teltonika fornisce gratuitamente 5 GB per il traffico dati per ogni azienda all'interno di RMS. Se avete bisogno di più dati per l'accesso remoto ai dispositivi finali, potete facilmente ricaricare. Ogni incremento di 2 GB costa 1 credito RMS. RMS API Ogni azienda all'interno di RMS ottiene 100 000 richieste API gratuite ogni mese di calendario. Questo è più che sufficiente per la maggior parte delle esigenze, ma se ne hai bisogno di più si può fare una specifica richiesta a Teltonika per aumentarle. Per maggiori informazioni, visita la pagina del vendor ATTENZIONE: Il pacchetto RMS viene consumato nel momento in cui viene associato a un dispositivo specifico. Di conseguenza, se il dispositivo viene rimosso da RMS o dovesse guastarsi, il pacchetto assegnato non può essere recuperato per essere riutilizzato su altri dispositivi. Inoltre, l'assegnazione di un nuovo pacchetto RMS sovrascrive quello precedente dello stesso tipo (management, VPN/Connect), senza effetto cumulativo sul singolo dispositivo.

Teltonika RMS o RMS VPN Service - Remote Management Service - Credito…

Teltonika Networks Remote Management System (RMS) è una piattaforma IoT all-in-one user-friendly…

Brand: TELTONIKA

Code: ART-111879

MPN

RMS

EAN -

Brand: TELTONIKA

Code: ART-111879

MPN

RMS

INFO

Page 267 of 295 267 268 269 270 271 272 273 274 275 276

Viewed

Allnet-Italy | Products | Surveillance, Access Management, IoT