Allnet-Italy | Products | Network & Wireless | Accessories | Transceivers

Categorie

Network & Wireless

Ubiquiti

Accessories

Media Converter

Power injector

Transceivers

Cable

Mounting Kit

power supplies

Spare parts

Expansion boards

Case

Other

Uninterruptible power supplies

Switching

Routing

Wireless

XPON

Network Tester

Licences & Warranties

Filters

close

Manufacturer

• Allnet
• AVM
• Cambium Networks
• Cisco
• Grandstream
• MikroTik
• QNAP
• Siklu
• TP-Link
• Ubiquiti

Reset filters

Go to Results

Articoli 45

Products per page

12 24 36 48

Brand

Stock available End User Best Price

Cisco 1000BASE-BX-20U SFP Transceiver 1000Mbit/s 1310nm network media…

Cisco

ART-16246

MPN: MGBBX1

EAN   0882658262777

Highlights -Adds fiber-optic connectivity to Cisco Small Business and Cisco Small Business Pro Series switches. -High-performance link for connecting networks within a building or small campus area. -Easy removal with an integrated spring latch. -Hot swappable to maintain network availability. Product Overview Cisco® MFE and MGE Small Form-Factor Pluggable (SFP) or mini Gigabit Interface Converter (mini-GBIC) transceivers are easy-to-install modules that provide a simple way to add fiber connectivity or to add an extra Gigabit Ethernet port to your Cisco Small Business or Cisco Small Business Pro Series switches. The transceivers are available for single-mode or multimode fiber-optic cabling and can support distances from 100 meters up to 40 kilometers. The Cisco MFE and MGE transceivers provide fast and reliable connectivity between switches that are located on different floors, in separate buildings, or on a small campus network needing connectivity between sites. These transceivers can support both Fast and Gigabit Ethernet applications.

Cisco 1000BASE-BX-20U SFP Transceiver 1000Mbit/s 1310nm network media…

Highlights -Adds fiber-optic connectivity to Cisco Small Business and Cisco Small Business Pro…

Brand: Cisco

Code: ART-16246

MPN

MGBBX1

EAN 0882658262777

Highlights -Adds fiber-optic connectivity to Cisco Small Business and Cisco Small Business Pro Series switches. -High-performance link for connecting networks within a building or small campus area. -Easy removal with an integrated spring latch. -Hot swappable to maintain network availability. Product Overview Cisco® MFE and MGE Small Form-Factor Pluggable (SFP) or mini Gigabit Interface Converter (mini-GBIC) transceivers are easy-to-install modules that provide a simple way to add fiber connectivity or to add an extra Gigabit Ethernet port to your Cisco Small Business or Cisco Small Business Pro Series switches. The transceivers are available for single-mode or multimode fiber-optic cabling and can support distances from 100 meters up to 40 kilometers. The Cisco MFE and MGE transceivers provide fast and reliable connectivity between switches that are located on different floors, in separate buildings, or on a small campus network needing connectivity between sites. These transceivers can support both Fast and Gigabit Ethernet applications.

Brand: Cisco

Code: ART-16246

MPN

MGBBX1

EAN 0882658262777

stock 3

Your Price

INFO

Cambium - 10G SFP+ SMF LR Transceiver, 1310nm. -40C to 85C

Cambium Networks

ART-152750

MPN: SFP-10G-LR

EAN   5704174394679

This 1310 nm DFB 10Gbps SFP+ transceiver is a “limiting module”, designed for 10GBASE-LR applications. The SFP+ 10km module electrical interface is compliant to SFI electrical specifications. The transmitterinput and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.

Cambium - 10G SFP+ SMF LR Transceiver, 1310nm. -40C to 85C

This 1310 nm DFB 10Gbps SFP+ transceiver is a “limiting module”, designed for 10GBASE-LR…

Brand: Cambium Networks

Code: ART-152750

MPN

SFP-10G-LR

EAN 5704174394679

This 1310 nm DFB 10Gbps SFP+ transceiver is a “limiting module”, designed for 10GBASE-LR applications. The SFP+ 10km module electrical interface is compliant to SFI electrical specifications. The transmitterinput and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.

Brand: Cambium Networks

Code: ART-152750

MPN

SFP-10G-LR

EAN 5704174394679

stock 46

Your Price

INFO

Cambium - 10G SFP+ MMF SR Transceiver, 850nm. -40C to 85C

Cambium Networks

ART-152748

MPN: SFP-10G-SR

EAN   5704174389774

The SFP+ SR module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector. The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-SR standard. An open collector compatible Transmit Disable (Tx_Dis) is provided. A logic “1,” or no connection on this pin will disable the laser from transmitting. A logic “0” on this pin provides normal operation. The transmitter has an internal automatic power control loop (APC) to ensure constant optical power output across supply voltage and temperature variations. An open collector compatible Transmit Fault (TFault) is provided. TX_Fault is a module output contact that when high, indicates that the module transmitter has detected a fault condition related to laser operation or safety. The TX_Fault output contact is an open drain/collector and shall be pulled up to the Vcc_Host in the host with a resistor in the range 4.7-10 k?. TX_Disable is a module input contact. When TX_Disable is asserted high or left open, the SFP+ module transmitter output shall be turned off. This contact shall be pulled up to VccT with a 4.7 k? to 10 k? resistor The receiver converts 10Gbit/s serial optical data into serial PECL/CML electrical data. An open collector compatible Loss of Signal is provided. Rx_LOS when high indicates an optical signal level below that specified in the relevant standard. The Rx_LOS contact is an open drain/collector output and shall be pulled up to Vcc_Host in the host with a resistor in the range 4.7-10 k?, or with an active termination. Power supply filtering is recommended for both the transmitter and receiver. The Rx_LOS signal is intended as a preliminary indication to the system in which the SFP+ is installed that the received signal strength is below the specified range. Such an indication typically points to non-installed cables, broken cables, or a disabled, failing or a powered off transmitter at the far end of the cable.

Cambium - 10G SFP+ MMF SR Transceiver, 850nm. -40C to 85C

The SFP+ SR module electrical interface is compliant to SFI electrical specifications. The…

Brand: Cambium Networks

Code: ART-152748

MPN

SFP-10G-SR

EAN 5704174389774

The SFP+ SR module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector. The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-SR standard. An open collector compatible Transmit Disable (Tx_Dis) is provided. A logic “1,” or no connection on this pin will disable the laser from transmitting. A logic “0” on this pin provides normal operation. The transmitter has an internal automatic power control loop (APC) to ensure constant optical power output across supply voltage and temperature variations. An open collector compatible Transmit Fault (TFault) is provided. TX_Fault is a module output contact that when high, indicates that the module transmitter has detected a fault condition related to laser operation or safety. The TX_Fault output contact is an open drain/collector and shall be pulled up to the Vcc_Host in the host with a resistor in the range 4.7-10 k?. TX_Disable is a module input contact. When TX_Disable is asserted high or left open, the SFP+ module transmitter output shall be turned off. This contact shall be pulled up to VccT with a 4.7 k? to 10 k? resistor The receiver converts 10Gbit/s serial optical data into serial PECL/CML electrical data. An open collector compatible Loss of Signal is provided. Rx_LOS when high indicates an optical signal level below that specified in the relevant standard. The Rx_LOS contact is an open drain/collector output and shall be pulled up to Vcc_Host in the host with a resistor in the range 4.7-10 k?, or with an active termination. Power supply filtering is recommended for both the transmitter and receiver. The Rx_LOS signal is intended as a preliminary indication to the system in which the SFP+ is installed that the received signal strength is below the specified range. Such an indication typically points to non-installed cables, broken cables, or a disabled, failing or a powered off transmitter at the far end of the cable.

Brand: Cambium Networks

Code: ART-152748

MPN

SFP-10G-SR

EAN 5704174389774

stock 10

Your Price

INFO

Mikrotik S+DA0001 1m SFP+ SFP+ Black fiber optic cable

MikroTik

ART-155015

MPN: XS+DA0001

SFP+ 1m direct attach cable This is highly cost-effective way to connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks. They provide a low cost, low power and low latency interconnect solution for 10-Gigabit Ethernet, Fiber Channel and other industry standards, and are direct attached compliant and fully conform to the SFP+ MSA specifications.

Mikrotik S+DA0001 1m SFP+ SFP+ Black fiber optic cable

SFP+ 1m direct attach cable This is highly cost-effective way to connect two SFP/SFP+ devices (for…

Brand: MikroTik

Code: ART-155015

MPN

XS+DA0001

EAN -

SFP+ 1m direct attach cable This is highly cost-effective way to connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks. They provide a low cost, low power and low latency interconnect solution for 10-Gigabit Ethernet, Fiber Channel and other industry standards, and are direct attached compliant and fully conform to the SFP+ MSA specifications.

Brand: MikroTik

Code: ART-155015

MPN

XS+DA0001

stock 3

Data	Quantita	Date Confirmed
27.10.26	20	Yes

Your Price

INFO

Mikrotik S+31DLC10D 10000Mbit/s SFP+ 1310nm Single-mode network…

MikroTik

ART-155178

MPN: XS+31LC10D

S+31DLC10D is a 10G SFP+ transceiver with a LC connector, 1310nm, for up to 10 kilometer Single Mode fiber connections Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.

Mikrotik S+31DLC10D 10000Mbit/s SFP+ 1310nm Single-mode network…

S+31DLC10D is a 10G SFP+ transceiver with a LC connector, 1310nm, for up to 10 kilometer Single Mode…

Brand: MikroTik

Code: ART-155178

MPN

XS+31LC10D

EAN -

S+31DLC10D is a 10G SFP+ transceiver with a LC connector, 1310nm, for up to 10 kilometer Single Mode fiber connections Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.

Brand: MikroTik

Code: ART-155178

MPN

XS+31LC10D

stock 19

Data	Quantita	Date Confirmed
01.12.26	4	No

Your Price

INFO

ALLNET ALL4757 network transceiver module 10300 Mbit/s SFP+ 850 nm

Allnet

ART-152233

MPN: ALL4757

ALLNET ALL4757. Maximum data transfer rate: 10300 Mbit/s, Interface type: SFP+, Fiber optic connector: LC

ALLNET ALL4757 network transceiver module 10300 Mbit/s SFP+ 850 nm

ALLNET ALL4757. Maximum data transfer rate: 10300 Mbit/s, Interface type: SFP+, Fiber optic…

Brand: Allnet

Code: ART-152233

MPN

ALL4757

EAN -

ALLNET ALL4757. Maximum data transfer rate: 10300 Mbit/s, Interface type: SFP+, Fiber optic connector: LC

Brand: Allnet

Code: ART-152233

MPN

ALL4757

Reorder available

tempo di riapprovigionamento 11 Days

Your Price

INFO

Ubiquiti-UF-SM-PATCH-UPC- APC-PatchCord UPC/APC

Ubiquiti

ART-139608

MPN: UF-SM-PATCH-UPC-APC

Presenta un connettore SC/UPC su un'estremità del cavo, ed un connettore SC/APC sull'altra estremità. Caratteristiche: Da SC/UPC a SC/APC Fibra SM G.657A1 Simplex Rivestimento in PVC da 2,0 mm Lunghezza: 1,5 m

Ubiquiti-UF-SM-PATCH-UPC- APC-PatchCord UPC/APC

Presenta un connettore SC/UPC su un'estremità del cavo, ed un connettore SC/APC sull'altra…

Brand: Ubiquiti

Code: ART-139608

MPN

UF-SM-PATCH-UPC-APC

EAN -

Presenta un connettore SC/UPC su un'estremità del cavo, ed un connettore SC/APC sull'altra estremità. Caratteristiche: Da SC/UPC a SC/APC Fibra SM G.657A1 Simplex Rivestimento in PVC da 2,0 mm Lunghezza: 1,5 m

Brand: Ubiquiti

Code: ART-139608

MPN

UF-SM-PATCH-UPC-APC

stock 14

Your Price

INFO

Ubiquiti-UACC-SM-PATCH-APC-APC - PatchCord APC/APC

Ubiquiti

ART-139607

MPN: UF-SM-PATCH-APC-APC

EAN   817882026857

Presenta un connettore SC/APC su un'estremità del cavo, e un connettore SC/APC sull'altra estremità Caratteristiche : Da SC/APC a SC / APC Fibra SM G.657A1 Simplex Rivestimento in PVC da 2,0 mm Lunghezza: 1,5 m

Ubiquiti-UACC-SM-PATCH-APC-APC - PatchCord APC/APC

Presenta un connettore SC/APC su un'estremità del cavo, e un connettore SC/APC sull'altra…

Brand: Ubiquiti

Code: ART-139607

MPN

UF-SM-PATCH-APC-APC

EAN 817882026857

Presenta un connettore SC/APC su un'estremità del cavo, e un connettore SC/APC sull'altra estremità Caratteristiche : Da SC/APC a SC / APC Fibra SM G.657A1 Simplex Rivestimento in PVC da 2,0 mm Lunghezza: 1,5 m

Brand: Ubiquiti

Code: ART-139607

MPN

UF-SM-PATCH-APC-APC

EAN 817882026857

stock 57

Your Price

INFO

Mikrotik S-RJ01 Gigabit Ethernet network switch module

MikroTik

ART-68277

MPN: S-RJ01

EAN   4752224005090

S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. - Up to 1.25 Gb/s bi-directional data links - 100m transmission over unshielded - Compliant with IEEE Std 802.3TM-2002 - Compliant with SFP MSA - RoHSCompliance - Access to physical layer IC via 2-wire serial bus - RJ-45 connector - Hot Pluggable SFP footprint - +3.3V single power supply - Extended case temperature range (0°C to +85°C)

Mikrotik S-RJ01 Gigabit Ethernet network switch module

S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on…

Brand: MikroTik

Code: ART-68277

MPN

S-RJ01

EAN 4752224005090

S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. - Up to 1.25 Gb/s bi-directional data links - 100m transmission over unshielded - Compliant with IEEE Std 802.3TM-2002 - Compliant with SFP MSA - RoHSCompliance - Access to physical layer IC via 2-wire serial bus - RJ-45 connector - Hot Pluggable SFP footprint - +3.3V single power supply - Extended case temperature range (0°C to +85°C)

Brand: MikroTik

Code: ART-68277

MPN

S-RJ01

EAN 4752224005090

stock 43

Your Price

INFO

Page 4 of 4 1 2 3 4