Allnet-Italy | Products | Network & Wireless

Filters
Articoli 1543
Products per page

Mikrotik hEX PoE lite Ethernet LAN White wired router

hEX PoE lite hEX PoE lite is a small five port ethernet router in a plastic case, it has a USB 2.0…
Brand: MikroTik
Code: ART-74646
MPN
RB750UPr2
EAN 4752224000385

MikroTik Pair of preconfigured LHGG-60ad devices for 60Ghz link

MikroTik Pair of preconfigured LHGG-60ad devices for 60Ghz link (60GHz antenna, 802.11ad wireless,…
Brand: MikroTik
Code: ART-112436
MPN
RBLHGG-60adkit
EAN 4752224004031

MikroTik cAP lite with AR9533 650MHz CPU, 64MB RAM, 1xLAN, built-in…

MikroTik cAP lite with AR9533 650MHz CPU, 64MB RAM, 1xLAN, built-in 2.4Ghz 802.11b/g/n Dual Chain…
Brand: MikroTik
Code: ART-93378
MPN
RBcAPL-2nD
EAN 4752224003423

MikroTik OmniTIK 5 POE ac with 2 x 7.5dBi integrated 5GHz Omni…

MikroTik OmniTIK 5 POE ac with 2 x 7.5dBi integrated 5GHz Omni antennas
Brand: MikroTik
Code: ART-93286
MPN
RBOmniTikPG-5HacD
EAN 4752224004420

Mikrotik R11E-2HPND Internal RF Wireless networking card

R11e-2HPnD is our new 802.11b/g/n Dual Chain high power 1000mW miniPCI-e card, operating in full…
Brand: MikroTik
Code: ART-71982
MPN
R11e-2HPnD
EAN 4752224002587

Cambium Networks cnPilot E410 Indoor (EU) 802.11ac wave 2, 2x2, AP

Cambium Networks cnPilot E410 Indoor (EU) 802.11ac wave 2, 2x2, AP. 802.11ac wave2 indoor access…
Brand: Cambium Networks
Code: ART-118142
MPN
PL-E410X00B-EU
EAN -

Laird 32 dBi dual-slant, dual polarity parabolic antenna, Antenna

4900 TO 5875 MHz HIGH PERFORMANCE DISH ANTENNA The new HD Series dish antennas offered by Laird…
Brand: Laird
Code: ART-118045
MPN
HDDA5W-32-DP2
EAN -

Laird 29 dBi dual polarity (optional dual-slant, )parabolic antenna,…

HDDA5W-29-DP2 - Laird 29 dBi dual polarity (optional dual-slant, )parabolic antenna, Antenna
Brand: Laird
Code: ART-118043
MPN
HDDA5W-29-DP2
EAN -

Aten PE1324G-AX power distribution unit (PDU) Black 24 AC outlet(s)

-PE1324B: 200~240V; North America, Mexico, Japan, Taiwan -PE1324G: International The PE1324 Energy…
Brand: Aten
Code: ART-40229
MPN
PE1324G-AX
EAN 4710423778276
With Power over Ethernet (PoE) it is possible to supply ending devices via network cable not only with data but also with power. This means that you do not only save a power supply, it is now possible to install the ending devices at places with no power sockets. PoE holds a big savings potential. The ALLNET LT PoE products support the IEEE802.3af standard with a performance of 15.4 watts, the IEEE802.3at standard with 30 watts and the LT PoE standard with 90 watts performance. The ALLNET product series recognizes active PoE end devices automatically and supplies them wit PoE depending on the capacity requirement. Due to the combination of switch/injector, repeater and splitter it is possible to enable distances of more than 500 meters. Not PoE capable devices can still be supplied with up to 25V power after this distance. With the CAT6 cables it is therefore achievable to transport performances up to 90 watts via PoE. Highlights: - support IEEE802.3, IEEE802.3u, IEEE802.ab,IEEE802.3af, IEEE802.3at and LT PoE 90W - 1 Port 10/100/1000 Base-T (Data) for connection to a switch, and - 1 Port 10/100/1000 Base-T (Power/Data) for connection to a PoE Device (PD) - Automatic detection of whether the connected device is PoE capable With the ALLNET ALL048900V2 High Power PoE Injector you install your PoE-enabled IP devices such as wireless access points, VoIP phones and much more totally independent of existing electrical outlets. So you can choose the best locations for example WLAN access points installations in a building regarding the wireless technology, without having to worry about power cabling. Non-PoE switches can be efficiently „upgraded“ with Power over Ethernet, especially when you only need a few ports with PoE power supply. Here the ALL048900V2 saves the expensive purchase of a PoE switch. The ALLNET ALL048900V2 supports the IEEE802.3af standard with a power of 15,4 Watt, the IEEE802.3at high power standard with 30 Watt and the LT PoE with 90 Watt power. The ALL048900V2 must not be configured. It has an RJ45 jack and an RJ-45 output connector, which are connected to this switch and the end device to the PoE injector. The cable length can here, as usual in Ethernet, up to 100 meters between the switch and terminal in total. The compact design and the metal case of the ALLNET ALL048900V2 can be very inconspicuous installed and is extremely robust.

ALLNET ALL048900V2 Gigabit Ethernet PoE adapter

With Power over Ethernet (PoE) it is possible to supply ending devices via network cable not only…
Brand: Allnet
Code: ART-49018
MPN
ALL048900V2
EAN 4038816112279
Viewed
case form title case form subtitle
company *
email *
name *
surname *
comment
privacy * accept conditions
* mandatory fields